Prusa MK4 Single Layer Test 0.2mm
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Couldn't find the test print easy enough, so putting it out there in case anyone goes looking.
- Rating
- 4.933 / 5
- Likes
- 57
- Downloads
- 833
- Makes
- 15
- Views
- 2,617
- Reviews
- 15
Updated at source:
Model information
- Source
- Printables
- Category
- Test Models
- License
- Creative Commons — Attribution — Share Alike
I went looking for the single layer test print, I couldn't find it within 0.06 seconds so I just made one up real quick. It should obviously work with both the MK4 and MK3's as they are the same build volume :)
Printed at 0.2mm layer height
I used eSun's Cool White filament for the test print
If you accidentally (or impatiently ;) ) bend the test sheet, you can heat up the print bed to around 70 degrees and place the sheet on the bed. In no time you'll be able to make the test sheet flat again. It happens, I get it. Just don't burn yourself
X1C and P1P Single Layer Test can be found here: https://www.printables.com/model/473123-bambu-lab-p1p-one-layer-test-02mm