1 / 3
Sovol SV06 Plus CR Touch mount
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Mount to replace the stock inductive probe with a CR Touch.
- Rating
- 4.75 / 5
- Likes
- 43
- Downloads
- 211
- Makes
- 3
- Views
- 2,710
- Reviews
- 4
Updated at source:
Model information
- Source
- Printables
- Category
- Other Printer Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
I used two M3 x 4mm heat set inserts for attaching the CR Touch to the mount. Screws from the stock probe were used for attaching to the extruder assembly.
[bltouch]
sensor_pin: PA6
control_pin: PA7
x_offset: 30.0
y_offset: 0.0
speed: 20
stow_on_each_sample = false
samples: 1