Indesit dishwasher desk holder fix
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
The original desk holder of this dishwasher is too weak.
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 10
- Makes
- 0
- Views
- 120
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Kitchen
- License
- Creative Commons — Attribution
The desk of indesit dishwasher is intentionally created too weak and it is liable to rupture.
Use ABS filament, 3 perimeters and 50% infill to print. I has been used .45mm standard nozle, you will no benefit from smalled one. Use supports on a desk only. The printed thing should be mechanically tough.
Carefully use sharp knive and cut all plastic from original holder. The back side of desk is depicted on photo.
The holder can be inserted only. Insert it and find a proper position on dishwasher. Mark a position with some marker.
When you are ready, use CA glue to bind a new holder.