Turner Adaptor for Foam Insert for Large Tumblers
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Tumbler turner adaptor to fit ID ~ 78-80mm tumbers, and 20mm OD PVC tube. Using hollow closed-cell foam tube.
- Rating
- 0 / 5
- Likes
- 11
- Downloads
- 38
- Makes
- 0
- Views
- 426
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution — Noncommercial
I needed to create an adaptor that was capable of fixing to tumblers that had a 78mm inner diameter, which the standard foam football was not big enough to accomodate. Rather than create an adaptor to close the gap, taking a lead from the foam footballs, I created an insert for a foam tube. I used pipe insulation, as it was what I had on hand, but a hollow pool noodle should also work. The pipe insulation wasn't quite thick enough to firmly fit in the tumbler, but the insert puts enough pressure on it to expand past the 78mm needed to fit firmly. The three small holes are to allow air to escape.
Adaptor fits on a 20mm OD PVC pipe.