1 / 3
Shower wand wall mount
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Shower wand wall mount, uses two screws with wall anchors.
- Rating
- 0 / 5
- Likes
- 3
- Downloads
- 14
- Makes
- 0
- Views
- 138
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Bathroom
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
I designed this to replace an old wall mount that had the anchors disintegrate in the wall.
The wand holder is 23mm tapered to 22mm. Wall mounting holes are 5mm wide and 21.75mm apart from center to center.
Prints well on the top face, I used PLA and that survived for a week, Printed it again in ABS and that worked much better.