1 / 11
VCore 3.1 Bed Arms with Heat Inserts and Logos
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
I added heat inserts to the original bed arms
- Rating
- 0 / 5
- Likes
- 13
- Downloads
- 66
- Makes
- 0
- Views
- 504
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Printer Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial
Because I don't like the hex nuts and I like clean look of the bed arms, I remixed the original RatRig VCore 3.1 bed arms and added heat inserts.
On some (rear arm + right arm) I also added RatRig logos.
On the rear arm you need to replace the original M3x35 screws that hold the cable relief with M3x10.
For all three arms you need 8 pieces of M3 brass heat inserts.
I'm not gonna ask for a coffee, but please make sure you give me a like if you find this model useful.