1 / 4
Mjolnir Tissue Box
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
For all Thor fans : here is your tissue box !
- Rating
- 4 / 5
- Likes
- 23
- Downloads
- 66
- Makes
- 2
- Views
- 558
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Other Art & Designs
- License
- Creative Commons — Attribution — Share Alike
This model is cut in half to avoid supports ;) I added a little part to guide the fixation of the two parts.
Print it with a 0.2mm layer height for the parts with more details or a 0.3mm layer height for the “simple” parts.
Please read the guide to get all the informations needed to print it correctly ! 😉
If you enjoy the model and whant to tank me for my time, please consider leaving a like ✌
UPDATES :
08.05.2023 :
- Triquetra symbol added in a new folder (the quote is included in the part to make it easier to print)
11.05.2023 update :
- Changed the spacing between the triquetra and the quote. That way, there is less travel for the nozzle when doing the fuzzy skin and I saved around 1h for each part
- Added the “Top_0.3_D” and “Bottom_0.3_D” with a 0.3mm extrusion for the pattern instead of the original 0.5mm allowing it to be printed without any problem