Ocarina of Time - 12 hole Alto C Ocarina
We calculate the final price from your selected file. You review and accept it before payment.
Estimated printing price per file
€4.73 – €5.78 net (excluding VAT)
For file: PLA 0.2mm Recommended Settings / oc_oot_12h-ac_version-3_02mm_pla_mk3s_5h37m.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €5.25 excluding VAT (range midpoint).
- Weight reported by the author
- 58 g
- Print time reported by the author
- 5.62 hr
- Source material
- PLA
- Estimate material
- PLA
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
This is the Ocarina of Time.
- Rating
- 4.822 / 5
- Likes
- 1,045
- Downloads
- 7,087
- Makes
- 93
- Views
- 21,462
- Reviews
- 73
Updated at source:
Model information
- Source
- Printables
- Category
- Music
- License
- Creative Commons — Attribution — Noncommercial
I will publish new Ocarinas only on MakerWorld.
https://makerworld.com/en/@E.CAN3

This is my version of the Ocarina of Time in Alto C .
If you like it, leave a like, if you really like it and you want to support me, donations are welcome ;) PayPal
How does it sound?
Thanks to Denis Kovalev for making this video.
Changelog:
Version 3
- Reduced Airway hight, 1mm instead of 1,2mm,
- Teardroppier sounding
- Less airy
- Better breath curve
- Better sound
- Added a Version without the Triforce
Version 2
- Improved the soundhole for better breath curve, and better sound.
- Changed the design around the triforce a little bit.
The Ocarina
It is designed to be printed.
The internal design helps to reduce airy high notes( Better sound, no Acute Bend).
It is tuned: A4 up to F6
Standard 12-hole fingering
All holes closed for A4, all holes open for F6
For A4 the required air pressure is low , more opened holes need more air pressure to hit the note.
Print Settings
Rafts:
I use Brim
Supports:
No
Resolution:
0.2
Infill:
20%
Filament: Sunlu PLA+
Notes:
Print orientation is on the moutpiece, no support, only brim if needed.
0.4 mm nozzle
0.8mm wall thickness
4 Top and Bottom layers
Wall Ordering: Outside To Inside
Walls before Infill.
Bigger or smaller nozzles may change the tune.
Any other Wall Ordering may change the size of the airway and the soundhole, resulting in a to small Airway and/or soundhole.
Try to avoid stringing! It is hard to remove.
The soundhole and the airway have to be printed clean. Blobs or other errors in this area can mess everything up.
Glue the Triforce
The Position of the Triforce when the mouthpiece is pointing upwards:
U: upper segment
R: right segment
L: left

