1 / 1
Gridfinity Needle Nose Plier & Flush Cut Holder
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Gridfinity storage for a small pair of needle nose pliers and flush cutters.
- Rating
- 4.786 / 5
- Likes
- 138
- Downloads
- 1,165
- Makes
- 14
- Views
- 3,433
- Reviews
- 14
Updated at source:
Model information
- Source
- Printables
- Category
- Organizers
- License
- Creative Commons — Attribution — Noncommercial
I wanted low profile gridfinity storage for my flush cutters and needle nose pliers, so here it is! I modeled this for the needle nose pliers that come with Prusa printers and the flush cuts that come with Creality printers. I left some wiggle room in the cutout so it should work with any similar flush cutters and needle nose pliers.
Print Settings:
.6 mm nozzle
.3 mm layer height
Cubic infill
2 walls