Three Modifications for Bambu Lab Filament Spooler / Winder
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Two parts modified: Winder Spool holder main body.stl and Filament Guide Sled.stl.
- Rating
- 3 / 5
- Likes
- 122
- Downloads
- 1,092
- Makes
- 1
- Views
- 12,184
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Accessories
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Edit: 09-May-2023: Part #3 added:
Before I printed my spooler I dragged every part into TinkerCad, an assembly. Two parts I remodelled marginally:
The big base part was reported to be poorly fixed on your workbench, so I extended the base and brought in four (4) holes. Fixation holes similar like the "Donor Spool Holder", the holes are 198x124 mm apart (CTC). You may wanna use a little cone on your base plate to find hole positions easier.
Also I made four holes (Ø 3mm) on top of the four notches, here you can attach the addes part “Winder Spool SecureHatch(GT)” for securing the axle from leaving the “bearing place”, especially when using the handle. You can secure the "Hatches" by dowel pins or M3 screws. Refer the screenshot to the Yellow parts.
The “Filament Guide Sled”: instead of threading screws into the plastic I added two heat-insert holes for M3 heatinserts, doesn't wear out so quickly.
Still not happy with it at all right now.
Explore my other Printables: https://www.printables.com/de/@Tritschi