Budgie feeder (69mm drain pipe)
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A basic feeder with rounded top, and slight inner over-hang to reduce feed wastage. Fill from the top of the pipe.
- Rating
- 0 / 5
- Likes
- 3
- Downloads
- 20
- Makes
- 0
- Views
- 341
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Pets
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
69mm outside diameter pvc pipe (standard drain pipe) feeder suitable for smaller caged birds (Finches, budgies etc.). Feeder is approx 125mm deep x 100mm wide x 30mm high. Baffle STL. file is used as a bung on the bottom of the pipe to slow the rate of seed. Fill from top of the pipe, will require a top cap to prevent small birds defecating / dive bombing into it thinking it's a nice place to hide.
PLA or similar material. 3+ walls, 20%+ infill no rafts required. Supports required (tbh the feeder probably doesn't need them, but I used them anyway)