Bambu X1C & P1P Chamber Desiccant Trays
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
I was looking for a nice clean desiccant solution for the Bambu chamber and couldn't find 1. So, I made one.
- Rating
- 4.5 / 5
- Likes
- 91
- Downloads
- 530
- Makes
- 11
- Views
- 3,030
- Reviews
- 10
Updated at source:
Model information
- Source
- Printables
- Category
- Bambu Lab Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Update: 05/10/23
As Requested added lift tabs to get the covers off easier. Position the tabs towards the back of the printer.
Added the .Stp, .Ipt, & .STL files Top left with Tab, & Top Right with Tab.
These are also now in build plate 2 in the 3MF file with the slicer settings configured.
----------------------------------------------------------------------------------------------------------------
I was looking for a nice clean desiccant solution for the Bambu chamber and couldn't find one. so I made 1.
These fit perfectly in the notches on the bottom of the chamber so they can not accidently slide out of position and cause bed trouble.
Print Setting I used:
Top Left & Top Right:
.16 Layer Height, 5 wall loops, 30% Sparse infill & Honeycomb pattern.
Important: Use 0 Top & Bottom Shell layers and the infill of your choice to allow the Desiccant to breath.
Bottom Left & Bottom Right:
4 Top shell layers, 5 wall loops, 20% Sparse Infill & Rectilinear pattern
Once printed, I filled with Dry & Dry Blue Silica Desiccant.
Example: https://www.amazon.com/gp/product/B09TX3DNY5/
I got noticeably better prints and adhesion about 4 hours after installing these.
I hope you enjoy the design. Please like & favorite if you download.
https://www.buymeacoffee.com/Inevergiveup3D