1 / 2
Print cooler for HEMERA with Revo Nozzle
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is my design for a fan duct for the HEMERA with REVO Nozzle system. The coordinates for the BLTouch are:…
- Rating
- 5 / 5
- Likes
- 4
- Downloads
- 82
- Makes
- 1
- Views
- 319
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Other Printer Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
This is my design for a fan duct for the HEMERA with REVO Nozzle system.
The coordinates for the BLTouch are: X=0.38mm; Y=-42mm
You need support for the BLTouch version.
Screws needed:
For mounting the plate : 3x M3x8mm;
For mounting the fan: 2x M3x25mm + 1x M3 Nut
For the upper left fan mount, I needed a shortly longer screw as I was not able to connect the nut inside the HEMERA frame. But normally 25mm should fit.
Category: 3D Printer Extruders