Hood for CTC Dual
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Hood for CTC Dual This is my hood for the CTC Dual. The drawings are for 6mm wood and 3mm Acrylic glas The printed…
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 10
- Makes
- 0
- Views
- 77
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Accessories
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Hood for CTC Dual
This is my hood for the CTC Dual.
The drawings are for 6mm wood and 3mm Acrylic glas
The printed items are printed in ABS with 0,2mm and 20% infill.
Print Settings
Printer:
CTC Duplicator4
Rafts:
No
Supports:
No
Resolution:
0,2
Infill:
20%
How I Designed This
I designed the 3D parts by the use of SolidWorks.
I also designed the wooden parts by the use of SolidWorks and created the 2D drawings afterwards. The clip with the pin was intended to hold the big cover (Deckel gross) and make it slide able. Unfortunately it works too good - you are not able to slide the cover in and out.
But of course due to the clips you can lift up the cover easily.
Category: 3D Printers