1 / 2
Filament guide arm for Bambulab printers with PC4-M10 push fitting.
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Filament guide arm when using filament without the AMS. Attaches to the mount points of the spool holder .
- Rating
- 5 / 5
- Likes
- 12
- Downloads
- 68
- Makes
- 1
- Views
- 764
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Bambu Lab Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial
I have a separate spool holder to the side of the printer for when I use abrasive materials or TPU and use a Y-Splitter so I can easily switch between the AMS and the spool holder. I just didn't like a loose hanging PTFE tube.
So I created this guide arm. It attaches to the mount points which are normally used for the back spool holder. The PTFE tube attaches to a single PC4-M10 push fitting.
I printed it in PETG with 0.4mm nozzle at 0.08mm layer height (to get nice threads).