Wire shelf retainer sleeve
We calculate the final price from your selected file. You review and accept it before payment.
Estimated printing price per file
€0.73 – €0.89 net (excluding VAT)
For file: wire-shelf-sleeve_1_02mm_pla_mk3s_1h3m.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €0.81 excluding VAT (range midpoint).
- Weight reported by the author
- 5 g
- Print time reported by the author
- 1.06 hr
- Source material
- PLA
- Estimate material
- PLA
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
If you have those wire shelves with adjustable height on round-grooved rods, you may have a need for replacement…
- Rating
- 3.667 / 5
- Likes
- 48
- Downloads
- 191
- Makes
- 2
- Views
- 859
- Reviews
- 3
Updated at source:
Model information
- Source
- Printables
- Category
- Mechanical Parts
- License
- Creative Commons — Public Domain
If you have those wire shelves with adjustable height on round-grooved rods, you may have a need for replacement retainer sleeves. These are tapered on the outside, not tapered on the inside, with ridges inside that fit the grooves in the shelf supports.
Print two for a set.
Print instructions
When loading the model into your slicer, do NOT allow the slicer to "fix" the errors in the print - as doing this destroys the alignment of the printed part. Also, when loading - load as a single assembly or the slicer may "combine" sections of the sleeve.
Print with raft (1 or 2 layers) to get better bed adhesion
Each shelf typically takes 8 of these (2 per corner).