1 / 3
0.75 inch (19mm) Dowel Bracket For Dry Box
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
I needed a mounting bracket for a dry box I was making.
- Rating
- 5 / 5
- Likes
- 12
- Downloads
- 73
- Makes
- 1
- Views
- 472
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Accessories
- License
- Creative Commons — Attribution — Share Alike
I needed a mounting bracket for a dry box I was making. I wanted to reuse a 3/4" dowel I already had lying about but I couldn't find a bracket that was quite what I needed.
The outside piece helps re-enforce, provide air blocking, and to provide shallow recess for the nuts to stop them turning during tightening.
Print instructions
- 0.2mm layers
- 3 perimeters
- 10% infill
Assembly:
Hardware:
- 8x M3 x 8 screws (4 per side)
- 8x M3 hexagonal nuts
- 8x M3 x 8 screws (4 per side)
I used a ruler to try to find the center of each side (you can see my sharpie mark). Then used the back pieces as a template to mark the holes I needed to drill through the storage box I was attaching them to.