Trinus Spool Holder and Filament Guide
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A Spool Holder and Filament Guide for the Kodama Trinus Printer. To use with Spools up to 750mm (Updated Version! The…
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 27
- Makes
- 0
- Views
- 179
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Accessories
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
A Spool Holder and Filament Guide for the Kodama Trinus Printer.
To use with Spools up to 750mm (Updated Version! The original one is 650mm) width. Printable on the Trinus itself.
UPDATE: I've received Feedback that the Model was too tall for Pango. So there is now a STL specially for those who are using Pango as Slicer. The new Model is rotated 45 Degrees and 5mm shorter in hight.
UPDATE UPDATE: There is now a Version with a longer and bigger arm, capable of carrying spools up to 750mm. I haven't actually printed this Version, and therefore would really appreciate feedback! Please let me know your infill density and how it worked out with larger Spools up to 2KG and more. Thanks.
Please share your print and let me know if any issues occur :)
Print Settings
Printer:
Trinus
Rafts:
No
Supports:
No
Resolution:
0.2 mm
Infill:
30 %
Notes:
I printed this in PLA on my Trinus. Sliced it in Simplify 3D using 30% fast Honeycomb as infill. For a 1Kg Spool of Filament that works pretty well, until now i haven't noticed any bending.
But for Skeptics i recommend using something like PETG or/and a little higher Infill percentage.
I recommend at least 3 Outlines / Perimeter Shells.
Category: 3D Printer Accessories