SCALEPRINT 9 STACK CHIMNEY 00/HO SCALE
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Hello everyone Into the archives again, still in the chimneys folder. this time I have a 9 stack brick chimney from on…
- Rating
- 0 / 5
- Likes
- 5
- Downloads
- 47
- Makes
- 0
- Views
- 337
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Architecture & Urbanism
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Hello everyone
Into the archives again, still in the chimneys folder. this time I have a 9 stack brick chimney from on top of one of my big Tudor builds
I have included screen caps of the model so you can see how it goes together. There is also a base section that will fit a roof of 45 degrees.
so you need to print for the chimney
4 CB-15-CORNER-SECTION.stl red bits
8 CB-15-LEFT-SECTION.stl green bits
8 CB-15-RIGHT-SECTION.stl blue bits
1 CB-15-TOP.stl yellow bit
2 CB-15-FORMER.stl brown bits
1 CB-15-BASE.stl green bit
2 CB-15-BASE-BRICK-STRAIGHT.stl purple bits
2 CB-15-BASE-BRICK-VEE.stl cyan bits
Print Settings
Printer:
ORDBOT HADRON
Resolution:
0.2 NOZZLE .1 LAYER HEIGHT
Post-Printing
ASSEMBLY
Of course this model needs assembly, I used super glue on a toothpick to assemble this, gluing to the former first and making sure each part lines up correctly.
below are images of how the parts go.
TOP VIEW
BOTTOM VIEW
45 DEGREE CHIMNEY BASE
Category: Buildings & Structures