SCALEPRINT CB-18 BRICK CHIMNEY 00/H0
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Here we have the second of the chimneys for 00/HO models, this one is a brick texture and the base section is 10mm…
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 60
- Makes
- 0
- Views
- 268
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Architecture & Urbanism
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Here we have the second of the chimneys for 00/HO models, this one is a brick texture and the base section is 10mm x16mm and the top is about 16mm x 20mm, and is about 30 mm tall with a capping. Is printed in 4 parts to get best detail print then glued together after printing. There are 4 different bases one for 45 degree roofs and one for 60 degree roofs.plus 45 degree sitting across the ridge plus there are 3 different caps that can be used on the top
The chimney pots in the photo are not part of this thing.
I use ABS Acetone mix to glue the parts to the plaster also to glue the plaster together, makes a very versatile glue.
Print Settings
Supports:
Yes
Resolution:
0.2 NOZZLE .1 LAYER HEIGHT
Notes:
I use supports on the 45 degree edges
Category: Buildings & Structures