1 / 2
Circular Sock Knitting Machine - European simplifications
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is only a collection of small modifications to make it easier with my stock or with the EU supply chain.
- Rating
- 0 / 5
- Likes
- 64
- Downloads
- 205
- Makes
- 1
- Views
- 3,925
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Still in progress
I was too lazy to look for 6mm rod so I modified that to 8 mm. Now I could make whole construction with one size of the rod.
- Yarn Stand Guide modified for 8mm rod
Brass bushings for the pivot and brake were made of a 4mm brass tube from Hornbach, which needs to be pressed inside with a vise. A 3mm hardened rod was used for the axis. - Yarn Stand Base modified for 8mm rod
- Yarn Stand Weight scaled for 8mm rod
- The bearing housing and crank axis are parts of my lame version of the table. I'm using M8 screw with a hex head as the main crank axis. Rotation is stoped on one side by a hex cap and by a cap with a nut with drilled and tapped hole for the M3 screw.