10 way water manifold
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Even pressure manifold for water based distribution.
- Rating
- 0 / 5
- Likes
- 7
- Downloads
- 57
- Makes
- 1
- Views
- 422
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Mechanical Parts
- License
- Creative Commons — Attribution
For a project I was working on I required 10 small water jets which displace the same pressure while stemming from one water inlet tube, so I designed this manifold. It works well but if some of the outlet tubing is significantly shorter or longer tube there will be a slight difference in the water pressure. It is designed to be mounted to 20x20 extrusion but it could be mounted to anything. There is a 4mm through hole located on the tab. The inlet is designed for 9.0mm ID sized tubing and the outlets are designed for roughly 2mm ID.
When printing I would recommend printing with at least 4 or 5 perimeters to minimise leakage.