1 / 2
[WIP] Ultimaker 2 (UM2) part fan shroud - no supports needed — image 1
1 / 2

[WIP] Ultimaker 2 (UM2) part fan shroud - no supports needed

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

[! Work in progress] Replacement part fan shroud for Ulitmaker 2. Prints without supports. Mounts using stock hardware.

Rating
5 / 5
Likes
13
Downloads
189
Makes
1
Views
807
Reviews
2

Updated at source:

Model information

License
Creative Commons — Public Domain

[I've removed the models for the first version as they cooled the nozzle more than the part! ]

These ducts position the air flow around part under the nozzle better. 
Because the cooling is more effective you may need need to reduce max fan speed to 75%-60% to avoid heater errors.
Slotted mounts allow for height adjustment. 

These models print without supports. 
Print in PETG, ABS, ASA or other temp resilient material.
2-3 walls and ~30% infill should be fine.

 The picture block is a clone olson block.

Tags