1 / 2
CW Morse Series 37 Morse Key Magnetic Base — image 1
1 / 2

CW Morse Series 37 Morse Key Magnetic Base

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

This is an add on magnetic base for a CW Morse Series 37 Dual Paddle morse key.

Rating
0 / 5
Likes
3
Downloads
27
Makes
0
Views
887
Reviews
0

Updated at source:

Model information

License
Creative Commons — Attribution

This is an add on magnetic base for a CW Morse Series 37 Dual Paddle morse key.  

For the construction you will need:

  • 4 x m3 nuts
  • 4 x 15mm m3 screws / bolts
  • 4 x 10mm dia x 1.5mm thick N35 Neodymium magnets.  
  • A dab of superglue or similar to keep the magnets in place.  

If the nuts won't fit easily into the cutouts then simply thread the screw through the hole in the plate and tighten.  This will drag the nut into its cutout.

The plate can be printed without raft or supports. 

 

Tags