Impossible dovetail - Rotation Version

EDIT 2020-07-23: Adding stl for without Magnet version

EDIT 2020-07-23: Pay attention to sharp corners, and not to cut you with them!

I made my own version of the impossible dovetail, rotation version.

The 2 magnets are optionnal and maintain the puzzle locked.

The model is fully adjustable directly on Onshape at the link below.

Here is the version I printed with a 0.2mm clearance between the dovetail. This provide a smooth slides and can be adjusted according to your 3d printing machine. I am using here Ø1/4inch x 1/4inch height magnets, but this is adjustable too on Onshape.

You can buy those kind of magnets directly from Ebay or Amazon.

https://cad.onshape.com/documents/60396e5c63c565988e6ed512/w/52229e95529fa9628180adbd/e/d33bbbb3d542d5db88a851b8?configuration=Base_Length%3D0.05%2Bmeter%3BDovetail_Tolerance%3D1.0E-4%2Bmeter%3BMagnet_Diameter%3D0.00635%2Bmeter%3BMagnet_Height%3D0.00635%2Bmeter%3BTotal_Height%3D0.025%2Bmeter

Print Settings

Printer Brand:

Creality

Printer:

Rafts:

No

Supports:

Resolution:

200μm

Infill:

Filament: 3D Spark PLA

Category: Puzzles