VORON AB Belt Installation Helper (Clamp)
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
3 piece belt clamping mechanism to facilitate installation of the carriage on the Voron 2.4 and Trident
- Rating
- 4.958 / 5
- Likes
- 614
- Downloads
- 3,804
- Makes
- 32
- Views
- 12,550
- Reviews
- 24
Updated at source:
Model information
- Source
- Printables
- Category
- Accessories
- License
- Creative Commons — Attribution
This is a simple, easy to print and easy to use, 3 piece clamping mechanism to facilitate installation of the belts and carriage on the Voron 2.4 and Trident. You need two sets of these, one for each side of the carriage. I personally found that installing the belts and the carriage on the 2.4 was not very easy with just one person, so I designed these. You will need to install 4 heat set inserts into the U shaped piece and then use 4 M3x18 (or 20) screws to hold the three pieces together.
Use standard Voron print settings. Just make sure you print the U shaped piece vertically, so the four holes can be printed accurately.
[Update 5-13-2023]
Added a two screw version of the three parts. The original design used 4, which was unnecessary, however I left those models if anyone is still interested. I did not update or include images of the two screw version. I simply removed the four existing corner holes and replaced with two center holes.
[UPDATE 5-18-2023]
Per request, I have added the CAD step file for those that want to modify the design