Small embroidery box for thread, scissors, needles
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A small embroidery box I designed for my wife to hold thread, scissors, and needles
- Rating
- 5 / 5
- Likes
- 26
- Downloads
- 81
- Makes
- 0
- Views
- 629
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Organizers
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Overview
A small box I made for my wife to store embroidery thread, a small pair of scissors, and needles.
The needles are held in place with magnets!
If you like this, please consider clicking the ❤ button. I'd love to see your makes, too - please upload photo(s) if you're able - thanks so much!
Printing
I printed in PLA with a 0.4 nozzle. It's designed for 4 perimeters using PrusaSlicer's thicknesses (1.67mm for 4 perimeters for the outside thickness, 0.86mm for 2 perimeters for the interior divider thickness). These are parameters in the Fusion 360 file, so you can adjust if needed.
The magnets I used are 8mm in diameter and 1.67mm thick. For the parameters in the Fusion file, I manually set those to 9mm and 2mm, respectively, to give some clearance/tolerance for the magnets to fit.
You'll need to insert a pause in your slicer just before the layer that covers the magnet openings.
Updates
May 12, 2023
- Initial version