Mini Desktop Case for Orange Pi 5 with Ice Tower intended for Raspberry Pi
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This works with custom metal brackets to mount the heatsink on the Orange Pi.
- Rating
- 5 / 5
- Likes
- 64
- Downloads
- 359
- Makes
- 3
- Views
- 6,817
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Computers
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
This is all the stuff to mount an Original Ice Tower Cooler intended for a Raspberry Pi, on an Orange Pi 5.
52Pi have released a kit to mount a Low Profile Ice Tower Cooler on an Orange Pi 5. I was already working on this project when I heard about the 52Pi official kit.
I have no idea any details of the 51Pi kit. I don't have one (yet?).
So anyway, I just did my own thing, not related to 52Pi's thing in any way.
Doing this thing requires a pair of these laser cut brackets. I don't have a laser cutter that will do steel. So I had to order a small batch of these, or else pay a minimum order fee. So if you want to do one of these, but you don't have a way to cut the brackets, contact me. I may have a few to sell.
There is a whole album with pics of all of this and explanations of everything.
There's a place on the bottom for a 2.5" SSD.
This case is intended to be used with threaded heat-set inserts. www.amazon.com/gp/product/B09KZSJS88
There are little recesses on the bottom for these silicon feet www.amazon.com/gp/product/B073W1B3G1
I designed this to be printed at .25mm layer height. .24 will work if you want to respect magic numbers or whatever. But there are a couple of pieces that are pre-supported and if you print at other layer heights, the support may bind.