PuzzleBlocs - Basic
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
These blocks tile on a 25mm grid with a simple dovetail for baseplate-free modular storage. This is a work in progress!
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 10
- Makes
- 0
- Views
- 114
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Building Toys
- License
- Creative Commons — Public Domain
Normally, you build starting from the back right. Male dovetails are on right and back sides of blocks, aside from inverted blocks that have a female where a male would normally be.
Rather than decorative blocks, we just have cover plates you slide onto the exposed female edges. You can print a design on paper and glue it on the flat surface to create textures.
There is no vertical stacking, if you want multiple layers, you join them with tall blocks that span multiple layers.
A raw filament can be poked through the side holes to lock parts together semi-permanently.
Not every possible arrangement of blocks has been tested! YMMV! There may be bugs in the spec with so many blocks! This set isn't 100% complete
Take a close look at the 3D previews and note the orientation of the dovetails, remember, exposed male dovetails don't accept cover plates. Maybe try building your layout on the cura build plate before you do it for real!
FreeCAD source here, but it's a real mess: https://github.com/EternityForest/PuzzleBlocs