dynamic funnel-tube snare drum / resonance chamber 2*90g 210mmXYZ PETG
We calculate the final price from your selected file. You review and accept it before payment.
Preliminary estimate for PETG
€4.58 – €5.60 net (excluding VAT)
For file: 6Color250degreeHarmonikCaroMElipsoidXYZ210_6KantkochSW45mm_0.3mm_PETG_MK3S_4h10m.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €5.09 excluding VAT (range midpoint).
- Weight reported by the author
- 89 g
- Print time reported by the author
- 4.16 hr
- Source material
- PET
- Estimate material
- PETG
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
Print two tubes, put one in an other! Ready is your snare-drum tube! Prusaslicer2.5.2
- Rating
- 0 / 5
- Likes
- 11
- Downloads
- 34
- Makes
- 3
- Views
- 630
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Music
- License
- Creative Commons — Attribution
Have fun use it as a mobile snardrum!:
reward 100€: who knows this melody and rythm played around 1974 in the german radio (instrumental!)
Short Video about mountig prozedure fixing 2 tubes together and start playing!
https://youtube.com/shorts/ms7wncYG5uM
https://youtube.com/shorts/ms7wncYG5uM?feature=share
Snare-Effekt is caused by putting two tubes one in an other. The elipsoid-pattern suits similar like a puzzle. As soon as you start hitting against it, it will vibrate and cause a gentle pretty snaredrum sound!
Make your voice nicely sound like a Chelo in the deeper frequencies!
If you use transparent filaments like prusared caminrotgalaxy or clear use temperatur 250degrees. I programmed 242degrees for recycelt PETG!