Philips HUE 1U Rack Mount (PoE splitter / Keystone)
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
1U Mount for two Philips HUE Bridges that can be connected to the internet (and power) using a PoE splitter or a…
- Rating
- 5 / 5
- Likes
- 50
- Downloads
- 321
- Makes
- 6
- Views
- 3,833
- Reviews
- 5
Updated at source:
Model information
- Source
- Printables
- Category
- Computers
- License
- Creative Commons — Attribution
1U Mount for two Philips HUE Bridges that can be connected to the internet (and power) using a PoE splitter or a keystone. The button on the bridge can also be made accessible while the unit is mounted using the button pusher.
The parts need to be connected together using 2x M2 nuts and 2x M2*10mm screws. The way they mount together is very tight in some places, so a flexible screwdriver attachment (like the one from iFixIt) or a tiny screwdriver/hexkey is required.
The PoE mount is designed for the DSLRKIT 5V PoE splitter (https://www.amazon.nl/dp/B08BZB3DQW?ref_=cm_sw_r_apin_dp_M4PEED5171B5MSG1N8ZF).
The keystone mount should be able to hold any standard keystone.
For the full mount you will need:
1x HUE mount left (with/without button hole)
1x HUE mount right (with/without button hole)
2x Keystone mount / PoE splitter mount
2x HUE button pusher (if mount printed with button hole)
6x M2 nut
6x M2*10mm screw
2x Philips HUE bridge 2nd gen
2x Keystone module (passthrough/LSA) / 2x 5V PoE splitter
Print Settings
Printer Brand:
Creality
Printer:
Ender-3 v2
Rafts:
No
Supports:
No
Resolution:
0.16
Infill:
20
Filament: eSun PETG Black
Notes:
I printed these parts (except for the button pusher) with brims, because they kept curling up. Can probably be printed without if you have a better printer or better print settings.
Category: Computer