Anti-rattle Ragim Quiver Tube Insert
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Insert into a Ragim brand belt quiver to prevent arrow rattling.
- Rating
- 0 / 5
- Likes
- 12
- Downloads
- 49
- Makes
- 0
- Views
- 700
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Outdoor Sports
- License
- Creative Commons — Attribution — Noncommercial
Insert into a Ragim brand belt quiver(http://www.ragim.org/product/accessories/quiver-2t) to prevent arrow rattling.
The quiver this is intended for has 2 tubes, one is by about 2 cm longer. The middle part has to be printed twice to fit the length of the shorter tube and be almost flush. To achieve the same for the shorter tube you need to print the top part two more times (but it is not strictly necessary).
I glued the parts together with superglue.
Printed in PLA. My first model with some rookie mistakes. The pins are exactly the same as the holes they go in so some filing is needed.
Max. arrow diameter is 10 mm. Each tube fits 5 arrows.
My original plan was to line the inside and the holes to further dampen the rattling, but with larger vanes it is not necessary, since the vanes press on one another and keep the arrows in place.