Remixed Print In Place Rocket Launcher
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
I had some problems printing the original version with a 0.6mm nozzle on my larger printer. So I remixed it with changes
- Rating
- 5 / 5
- Likes
- 41
- Downloads
- 382
- Makes
- 7
- Views
- 2,166
- Reviews
- 4
Updated at source:
Model information
- Source
- Printables
- Category
- Other Toys & Games
- License
- Creative Commons — Attribution — Noncommercial
I had some problems with the latching function and trigger switch of the original version when I printed it on my larger printer with a 0.6mm nozzle. Even with Arachne slicing some areas didn't resolve well for the locking mechanism using the larger extrusions widths of a 0.6 nozzle.
The easy solution would have been to print it on one of my smaller printers, or change my nozzle. But Nakozen did such an amazing job on his model that I really wanted to better understand how the mechanism was designed and tuned. So I remodeled the launcher in Onshape to tune the changes I wanted, plus as a learning exercise.
All credit goes to Nakozen, redesign is easy when the base concept and design is so good to start with.
If you want to play with the Onshape design the link is here: