Calibration Cube 20mm with 3mm hole
We calculate the final price from your selected file. You review and accept it before payment.
Preliminary estimate for PETG
€0.37 – €0.45 net (excluding VAT)
For file: Cube20mm_0.6n_0.2mm_PETG_MK3SMMU2S_28m.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €0.41 excluding VAT (range midpoint).
- Weight reported by the author
- 4 g
- Print time reported by the author
- 28.2 min
- Source material
- PET
- Estimate material
- PETG
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
A 20mm square cube with minimal text size and a 3mm hole for m3 screw test.
- Rating
- 5 / 5
- Likes
- 2
- Downloads
- 87
- Makes
- 0
- Views
- 269
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Test Models
- License
- Creative Commons — Attribution — Share Alike
Summary
A 20mm square cube with minimal text size and a 3mm hole for m3 screw test.
Design and modification
This size model is big enough for acquiring enough significant digits for normal caliper but not spending too much materials to print it. The text is minimized and collected to the same corner for better looking. The blank area makes it clear to observe the print quality. A 3mm hole is designed for check the inner dimension of the print.