1 / 5
Easy Print 1:100 Leopard 2A6
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
I split up m_bergman's Leopard 2A6 into multiple pieces for a cleaner print on FDM printers and made the gun movable.
- Rating
- 4.771 / 5
- Likes
- 585
- Downloads
- 2,443
- Makes
- 43
- Views
- 12,764
- Reviews
- 35
Updated at source:
Model information
- Source
- Printables
- Category
- Vehicles & Machines
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
This is a remix of https://www.thingiverse.com/thing:4718232
Supplies:
- Superglue
- Blue Tape (optional)
Printing Instructions:
- Use 0.1mm layer height for best results
- Use the .3mf file with custom supports or use build plate supports
Assembly Instructions:
- Remove all supports
- Use Pin to help align the parts (optional)
- Glue Gun Top to Gun Bottom
- Set the assembled gun into Turret Bottom
- Note: apply a small square of blue tape onto the hinges if they are too loose
- Glue Turret Top to Turret Bottom
- Carefully glue Roof MG onto the post next to the loader's hatch (see exploded view)
- Glue Hull Top to Hull Bottom
- Glue Track L and Track R to the hull
- Insert the turret into the hull
Areas where supports are necessary (included in Leopard2A6.3mf)
Exploded view
