1 / 2
Sheath for Vargo Dig Dig Tool
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A case or sheath for the Vargo Titanium Dig Dig backpacking shovel / trowel tool
- Rating
- 5 / 5
- Likes
- 9
- Downloads
- 134
- Makes
- 3
- Views
- 773
- Reviews
- 2
Updated at source:
Model information
- Source
- Printables
- Category
- Outdoor Sports
- License
- Creative Commons — Attribution — Noncommercial
The Vargo Dig Dig cat hole shovel / trowel is an amazing tool, but has sharp edges. Protect the contents of your bag with this sheath / case!
The sheath was designed to print with 95A TPU, which gives the ability to push in / pull out the shovel laterally but could likely be printed just fine with PETG or even PLA - it doesn't have to stretch and can slide over the shovel from the base.
My print settings:
- 0.6mm Nozzle
- 0.3mm Layer Height
- 1 Wall
- 4 Top/Bottom Layers
- No Supports
- Print orientation: standing, pointy end up!