Can Mugger Remix
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Made a few personal improvements to Triple G Workshop's original great design. I hope you like it!
- Rating
- 0 / 5
- Likes
- 6
- Downloads
- 73
- Makes
- 1
- Views
- 331
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Kitchen
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
After my first print I fell in love with the concept but noticed a few things that I wanted to change to make it print better and work better for myself. To make it print better I re-modeled it in Autodesk Inventor and exported it as a .stp file. I then imported the .stp file into PrusaSlicer to give me a clean circle rather than the segmented circle from the mesh. The segmented circle was causing erratic behavior with linear advance active, I also like the cleaner look of the clean circle. The other change I made was to increase the diameter of the hole in the bottom so that I can use a finger to push the cans out from the bottom and get a better grip on the top to fully remove them. I spent some time tweaking the model to try and find the best fit around the cans but you may need to adjust the scale by very fine amount(1% or less) to get the best fit. Absolute props to Triple G Workshop for coming up with this concept, and for allowing remixes!!
Printer: Heavily modified Anycubic Mega X w/0.4mm nozzle
Layer height: 0.2
External Perimeter Count: 3
Perimeter Generator: Arachne
Infill: 10%, Gyroid
No Supports