"Mesh" Top for Resin Print Dryer
We calculate the final price from your selected file. You review and accept it before payment.
Estimated printing price per file
€1.22 – €1.49 net (excluding VAT)
For file: MeshTop.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €1.36 excluding VAT (range midpoint).
- Weight reported by the author
- 14 g
- Print time reported by the author
- 1.5 hr
- Source material
- PLA
- Estimate material
- PLA
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
Solid Top Remix for the Resin Print Dryer by How2Texan. Allows for printing your own mesh using Infill trickery.
- Rating
- 5 / 5
- Likes
- 14
- Downloads
- 84
- Makes
- 1
- Views
- 500
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Accessories
- License
- Creative Commons — Attribution
This is a remix of How2Texan's Resin Print Dryer as I didn't have any mesh or grid to use for the original.
Using Tinkercad, I took the top part and added a solid face to it, and then in Cura I added a zone to allow changing the settings and removed the Top and Bottom layers. This allowed me to set my own "mesh" using the infill, changed it to 90 degrees and a grid pattern, and voila, instant print in place mesh.
Printed on BIQU B1 @0.2mm using SA Filament white PLA