1 / 3
M8 nut Pinecil stand for soldering iron storage box
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Modified stand for the Soldering Iron Storage Boxes using a M8 nut instead of a bearing
- Rating
- 5 / 5
- Likes
- 17
- Downloads
- 165
- Makes
- 3
- Views
- 853
- Reviews
- 2
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
This Pinecil/TS100/TS80 Stand is a modified version of the original by Termiman. Instead of using a bearing which is held in with a screw I used a M8 nut I had laying around. It is simply press fit into the printed part, depending on your printer you might need to scale it up or down slightly or simply use a dab of superglue.
The M8 nut is drilled out with a 8mm drill with a chamfer on both sides.
I used PETG, 50% Infill, 6mm nozzle, 0,2mm layer height and 2 perimeters.