Cross connection reinforcer for JobOx
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Cross connection reinforcer for the JobOx Magazine unit
- Rating
- 0 / 5
- Likes
- 4
- Downloads
- 67
- Makes
- 0
- Views
- 337
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Accessories
- License
- Creative Commons — Attribution
This part should be mounted underneath cross connection of the Magazine unit in order to make it stiffer and more reliable. To apply this update, the Magazine unit needs to be partly disassembled. All screws and connectors will be reused.
This reinforcement part can be applied to all Magazine units, which were delivered without such part (all Magazine revisions before M003).
Print using 3 perimeters, min. 5-6 top/bottom layers and sufficient amount of infill (>25%) in order to achieve proper stiffness. Please note: the part will fit in the slot very tightly. Usage of PETG is recommended.
- Update 16.05.2023 - v01 slight tolerances adjustment
- Update 19.05.2023 - v02 slight tolerances adjustment
____
Further modifications for JobOx are listed here: https://jobox.tech/pages/jobox-update-parts