1 / 4
Besta Grey Box Label Clip
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
I wanted some label holders for my Ikea Besta Grey Boxes; hope others enjoy them too.
- Rating
- 0 / 5
- Likes
- 12
- Downloads
- 68
- Makes
- 0
- Views
- 289
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Office
- License
- Creative Commons — Attribution
I wanted some label holders for my Ikea Besta Grey Boxes.
There are Three Types:
- BestaGreyBoxClip: This one is open-ended, so you don't have to worry about bridging
- BestaGreyBoxClipEnclosed: This one requires bridging, so if you're not confident, don't print this one.
- Adhesive-Label-Enclosed: If you want to use them on draws with a slot for adhesive, the one I used was 1mm thick, so they sit flush with the draw; see photos.
I printed them with a brim. I printed ten at a time with a brim, and they worked well.
PETG is better because it has a bit of flex and will keep its shape better, but PLA will also work. It won't bounce back, so it will stay deformed.