Inline switch enclosure for KCD1-5
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Enclosure for a KCD1-5 round switch, aprox 20mm diameter with a notch, cable opening 4x6mm flat, two wire
- Rating
- 0 / 5
- Likes
- 10
- Downloads
- 82
- Makes
- 0
- Views
- 360
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other House Equipment
- License
- GNU General Public License v2.0
Switch is intended to have 230V 6A load and 125v 10A load but this enclosure is not intended to be used with main power. Doing it you may violate local electrician code!
Designed to be used in the van switching 12V 5-10A only. Other options on your own risk.
Use PETG 100% infill, no supports needed, some stringing or slightly collapsed bridging may appear from inside but not really important as not visible. Use pair of wood screws to secure halves together - at least 20mm x 3mm size, good to heat them with soldering iron to melt thread in.