PolyBox PTFE adapter
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Pneumatic adapter for Polybox or any 8mm hole.
- Rating
- 4.8 / 5
- Likes
- 55
- Downloads
- 355
- Makes
- 9
- Views
- 1,765
- Reviews
- 10
Updated at source:
Model information
- Source
- Printables
- Category
- Accessories
- License
- Creative Commons — Attribution
I am using the Polybox for storing and using my filament but the way the big 6mm ptfe tubes are attached to the box are really poor.
To fix this I designed an adapter to connect the 6mm ptfe tube to a pc6m10 or pc4m10 pneumatic connection.
The hole being 8 mm in the box, the adapter consists of a bottom part M8 screw with a hole inside connecting to the top part receiving the pneumatic connector.
So you can use either 8mm tubes or 4mm !
=> Update : Changed the tolerance of the screw assembly, and now it is way easier to screw in !
Update 2 : added a version for 3mm filament.
Print instructions
Rafts:
No
Supports:
No
Resolution:
0.15
Infill:
100%
Filament_material:
PLA