Mini Wind Sock
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A nice little working windsock to improve any scale airfield. Designed around UMX planes.
- Rating
- 0 / 5
- Likes
- 14
- Downloads
- 74
- Makes
- 0
- Views
- 760
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- RC & Robotics
- License
- Creative Commons — Attribution
Print Instructions
Its only a 3 hour print on slow settings but that could easily be taken down to and hour and a half.
Only uses 24 grams of pla.
Wind Sock: Set your line width to .4 mm. Can't be printed in vase mode because there are holes for the screws.
Wind Sock Stand: Use 4 perimeters and 15% infill.
Hardware-less Connecter: Uses built in pins rather than screws.
Hardware Using Connector: Uses two short M2 screws. (You don't need to print both connectors, just one.)
Rc Plane RC plane Airport Airfield Runway