1 / 6
Lemfo LEMT Watch Bands Mounting
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
New mounting for Lemfo LEMT watch with two 14 mm bands. For assembly, you need : 2 mesh band 14 mm width.
- Rating
- 5 / 5
- Likes
- 6
- Downloads
- 66
- Makes
- 2
- Views
- 795
- Reviews
- 2
Updated at source:
Model information
- Source
- Printables
- Category
- Portable Devices
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
New mounting for Lemfo LEMT watch with two 14 mm bands.
For assembly, you need :
- 2 mesh band 14 mm width.
- 4 screw M2x10.
- 2 rods 78 mm, diameter 1.4 mm max.
Some post-processing is required to fit the parts to the watch.
When removing the original straps, be careful of the glue that holds the strap to the watch.
The font is from David Occhino Design, http://davidocchino.com/portfolio/typography/aurebesh.html
Print instructions
Printed with PETG filament at 0.15 mm layer height, "Prusament PETG" setting in PrusaSlicer.