1 / 1
SV06/Plus Mandalorian Mudhorn Extruder Knob
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Model information
- Source
- Printables
- Category
- Other Printer Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Updated 7/6/: Updated model for a tighter fit and to match the friction fit of the original extruder knob. Also adding the step file if others want to make their own.
Wanted to change the stock extruder knob with a custom Mandalorian one. If sliced with 0.2mm layer height you can add a filament change at layer 16 or when the bridging starts to highlight the symbol. Printed mine with dual green/black PLA for first 15 layers then changed to grey PLA+ for remaining layers.
For details in the mudhorn symbol you will want very good layer adhesion and print very slow with a 0.4mm nozzle or smaller.