CODEBREAKER
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is my try of a version of the game best known as "Mastermind"
- Rating
- 4.667 / 5
- Likes
- 84
- Downloads
- 160
- Makes
- 3
- Views
- 1,446
- Reviews
- 3
Updated at source:
Model information
- Source
- Printables
- Category
- Board Games
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
This is my try for a version of the game best known as "Mastermind". https://en.wikipedia.org/wiki/Mastermind_(board_game)
The board layout lets the players decide if they want to use 4 or up to 6 digits to decode.
These hinges can be screwed to the case with M3x5mm Cap-Screws and nuts (10 screws and nuts in total) (I would still recommend to additionally apply some superglue)
For the hinges and latches six M3x30mm screws work well.
The current layout works well for small hands (as it intentionally was designed for kids). I might upload a second version for bigger hands at some time in the future. So stay tuned for version 2 :)
Notes:
only the hinges and the small pegs need to be printed with supports.
I used 0.2 layerheight on all files and 15% percent infill for the case and about 50% for the structural parts (hinges, latches and pegs)