Anycubic Mono X Wham Bam alignment tool
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
easily and quickly install WhamBam flex plate to MonoX platen
- Rating
- 0 / 5
- Likes
- 6
- Downloads
- 26
- Makes
- 0
- Views
- 315
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Anycubic Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
I made this to make installing/aligning the Wham Bam flex plate quick and easy. This is for the Anycubic Mono X flex plate system. I printed the tray in PLA+ and the feet with Ninjaflex Midnight, though the feet are not necessary. The screws I used were M4x10mm flat head screws, with a washer and nut underneath.
The tray is 212mm x 138mm x 17mm and could probably be made on the MonoX if oriented vertically, but I used my Artillery Sidewinder X1 to make it. Step and Fusion 360 files provided so you can fiddle with it if you need.
*** UPDATE ***
I have removed the cutouts for the little magnets and added a cutout for the tab on the left side so the flex plate can be flipped over and still fit in the alignment tray. I swapped the stl/3mf file but not the step/f3d files. If you want them, just leave a comment!
