Halogen G9 Lamp Shade - Vase Mode
We calculate the final price from your selected file. You review and accept it before payment.
Preliminary estimate for PETG
€1.74 – €2.13 net (excluding VAT)
For file: Lamp - Shade_0.2mm_PCTG_MINI_2h20m.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €1.94 excluding VAT (range midpoint).
- Weight reported by the author
- 17 g
- Print time reported by the author
- 2.34 hr
- Source material
- PET
- Estimate material
- PETG
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
Simple shade for a lamp for 40W G9 Halogen Bulbs. Vase Mode.
- Rating
- 0 / 5
- Likes
- 8
- Downloads
- 33
- Makes
- 0
- Views
- 593
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Home Decor
- License
- Creative Commons — Attribution
Motivation
One of the five original glass shades broke and I did not want to throw the whole lamp im the trash. So I designed a 3D printable shade and hoped that PETG / PCTG would hold up to the temperatures. Spoiler: it does!
Printing
Mounting holes print normal, the shade prints in vase mode. Use the provided 3MF file to have it configured correctly. If you can't use Prusa Slicer, please use vase mode and increase the “normal print layers” until the mounting holes and the frame are covered.
Material
PLA will probably not work as the part gets hot due to the heat of the incandescent bulb.
Clear PETG works best, it does not get soft and looks nice.
Clear PCTG works just as well, I used this because it is supposed to have an even higher heat tolerance compared to PETG.
You can of course get fancy by using colored transparent filaments.
Final thoughts
I think it looks nicer than the original therefore I replaced all off them.