All-in-One EINSEY - RPi3/4 - Buck Converter Housing Unit
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This print is for those who are looking to install octoprint onto the device and are looking for an all-in-one device…
- Rating
- 4.667 / 5
- Likes
- 57
- Downloads
- 357
- Makes
- 3
- Views
- 2,860
- Reviews
- 6
Updated at source:
Model information
- Source
- Printables
- Category
- Other Printer Parts & Upgrades
- License
- Creative Commons — Attribution
This print is for those who are looking to install octoprint onto the device and are looking for an all-in-one device to enclose their Raspberry Pi3 or Pi4 and Buck Converter for the Prusa i3 Mk3/s/+.
This design is specific to this particular buck converter [see bellow]
This case reuses all the bolts and nuts from the old EINSEY case. To remove the square nuts, use a small tweezer to help push the nut of its hole.
Additional Items needed:
4x M3x10-12 screws (case)
4x M3 nuts (case)
3x M3x6-8 screws (Raspberry Pi)
3x M3x6-8 screws (Buck Converter)
Raspberry Pi3 or Pi4B
Appropriate Sized Connectors
Appropriate gauge wires
buck converter (24V +/- to 5 +/-)
This case uses this specific buck converter (https://www.amazon.com/gp/product/B07HRGV7XD/ref=ppx_yo_dt_b_asin_title_o00_s00?ie=UTF8&psc=1), which does not require any soldering!
This Einsey-RPi3/4b Connector Kit includes everything you need. You can find the listing here:
Follow this Youtube Instruction to make your Installation Easier:
Print instructions
Category: 3D Printer Parts Print Settings
Printer Brand: Prusa
Printer: I3 MK3S MMU2S
Rafts: No
Supports: No
Infill: 40%